You Are Here: Home » news » PMV

JK Cement to set up grinding unit in Balasinor, Gujarat

JK Cement laid the foundation of a grinding unit in Balasinor, Gujarat. Once fully operational, the unit will have a total output capacity of 0.7 MT annually. Balasinor is a small township, 87 kms from Ahmedabad, and marks the company’s foray into Gujarat. The plant, which will be spread over a total project area of over 8 hectares will be set up at a total project cost of Rs 200 crore. This is part of the ...

Read more

Dynapac inaugurates its new manufacturing facility in Pune

Dynapac India inaugurated its new state-of-the-art manufacturing facility in Pune for its road construction equipment, by the Fayat Group President and CEO, Jean-Claude Fayat. Dynapac started manufacturing soil compactors in India in 2008, and has since expanded the range to a full line of soil compactors and asphalt rollers to support the Indian and export markets. With 10 years of experience in manufactur ...

Read more

Schwing Stetter sets up fabrication unit, solar plant

SchwingStetter India (SSI) has set up a fabrication unit and a solar power plant at its manufacturing complex near Chennai. While the fabrication unit is aimed at achieving two key benefits as part of its localisation strategy, the new 100kwp (kilowatt peak) solar plant has been installed to save on power costs as also meet the energy needs of production units. The fabrication unit has been established at a ...

Read more

IROCK expands product line

In response to customer demand, IROCK Crushers has expanded its product line to include the TJ-3046 tracked jaw crusher. This high-performance primary jaw crushing plant is designed for medium scale operators in quarrying, demolition, recycling and mining applications. The TJ-3046 features a 13-cubic-yard feeder and includes a grizzly pre-screening grid. The feeder drive features a load control system to en ...

Read more

Good vibrations

You have two main products – Sylomer and Sylodyn – that are elastic products for vibration isolation. Could you explain their benefits and use? Explain the MPE performance too. Sylomer and Sylodyn are elastomers whose elastic properties are prominent and retained for a long period of time. Hence they can be applied for equipment directly below their legs or below their foundation blocks. Long term performan ...

Read more

Lubrizol sets up CPVC plant in India

 Construction of this plant is an integral component of the company’s previously announced $400 million global expansion of its resin and compounding manufacturing capacity. Investment in the new plant marks Lubrizol as the first major global producer of CPVC to establish operations in India. The estimated investment in the new plant is more than $50 million and it will have the capacity to produ ...

Read more

Liebherr unveils LTM 1160-5.2 five-axle crane

The load capacity of the new LTM 1160-5.2 has been increased by around 20-25% compared to its predecessor whilst the telescopic boom has remained at the same length of 62m. The vehicle width has been reduced which means that it is easier on constricted sites. The superstructure of the new LTM 1160-5.2 is powered by the engine in the crane chassis using a mechanical shaft. The six-part 62m long telescopic bo ...

Read more

Racing with machines

Interviewed by Jayashree Mendes Equipment manufacturers are constantly innovating to stay competitive. What is Schwing Stetter’s philosophy on innovation? We are one of the few companies in India who regularly bring out new or revamped products. Today, we have more than 60 different products in our range. We set up the company in 1999 and since then have launched around 13 products, which means about four t ...

Read more

BHEL to construct 120 MW project in Uttarakhand

 Bharat Heavy Electricals Limited (BHEL) has secured a contract to set up a 120 MW hydroelectric project (HEP) in Uttarakhand. This is the first major order for electro-mechanical equipment in the hydro sector, to be finalised by a government utility company in Uttarakhand, after the flash floods. Valued at `1,250 million, the order for setting up of hydro generating sets and associated electro-mechani ...

Read more

JCB to move production of compaction equipment to factories in India, UK

 JCB has plans to relocate production of compaction equipment to factories in the UK and India and close the Gatersleben site in Germany. The decision has been taken to improve JCB’s competitiveness in the compaction sector and follows a strategic review of its compaction business and recent structural changes in global market conditions. As a consequence of this review, JCB has decided that, by ...

Read more

Follow Us @

Published by & © 2015 ITP Publishing India Pvt. Ltd. All Rights Reserved. | Use of this site constitutes acceptance of our User Policy, Privacy Policy and Terms & Conditions

Scroll to top